Westchester Mold Removal

(646) 613-7032             (631) 481-1442                 (516) 508-9198


We work with industrial hygienists and indoor air quality environmentalists to ensure the job is done right the first time. With the proper testing and protocols every job can be a success. We use the most accurate and up to date moisture meter equipment to measure moisture in your wood floors, walls, ceilings, and cabinets. We then use infrared cameras to identify the origin and the extent of the damage.

Mold growth can be controlled indoors by controlling moisture indoors. The EPA reports that Molds can be found almost anywhere; they can grow on virtually any organic substance, as long as moisture and oxygen are present. There are molds that can grow on wood, paper, carpet, foods, and insulation. When excessive moisture accumulates in buildings or on building materials, mold growth will often occur, particularly if the moisture problem remains undiscovered or unaddressed.

Health Effects and Symptoms Associated with Mold Exposure !!!

When moisture problems occur and mold growth results, building occupants may begin to report odors and a variety of health problems, such as headaches, breathing difficulties, skin irritation, allergic reactions, and aggravation of asthma symptoms; all of these symptoms could potentially be associated with mold exposure. All molds have the potential to cause health effects. Molds produce allergens, irritants, and in some cases, toxins that may cause reactions in humans. The types and severity of symptoms depend, in part, on the types of mold present, the extent of an individual's exposure, the ages of the individuals, and their existing sensitivities or allergies.

Microbial Volatile Organic Compounds (MVOCs)

Some compounds produced by molds are volatile and are released directly into the air. These are known as microbial volatile organic compounds (MVOCs). Because these compounds often have strong and/or unpleasant odors, they can be the source of odors associated with molds. Exposure to (MVOCs) from molds has been linked to symptoms such as headaches, nasal irritation, dizziness, fatigue, and nausea. Research on MVOCs is still in the early phase.
Glucans or Fungal Cell Wall Components (also known as ß-(1-->3)-D- Glucans)

Glucans are small pieces of the cell walls of molds which may cause inflammatory lung and airway reactions. These Glucans can affect the immune system when inhaled. Exposure to very high levels of Glucans or dust mixtures including Glucans may cause a flu-like illness known as Organic Dust Toxic Syndrome (ODTS). This illness has been primarily noted in agricultural and manufacturing settings.

What needs to be done?

Some materials will need to be disposed off, such as ceiling tiles, insulation, wallboards, carpet, soft furnishings, clothes, papers and books. Non-porous metals, glass and hard plastics may be cleaned and reused. Depending on the degree of mold damage, semi porous wood may be cleaned up by drying, sanding and treating with anti microbial solvent before reusing.
In addition your heating, ventilation, air condition and crawl spaces will be dried, cleaned and then treated with Hepa filtration to remove remaining mold particles.
Our professional in house technicians follow our well planned mold abatement process to take care of mold clean up and repair to your satisfaction. There are certain steps we follow that insure we get your mold clean up job done right. First the contaminated area is sealed off using plastic sheeting, then we create negative air pressure to direct the mold to prevent mold spores from spreading to other parts of the house, directing the mold away from indoor space.

Mold Remediation Project

 1. All Workers to be Properly Protected in PPE Equipment, Gloves, Tyvek Suits, Respirators, etc.
 2. Set-up critical barriers to prevent cross contamination to structure and also achieve negative air.
 3. All openings such as doorways, windows, vents, airways to be covered with 6 mil-poly. This will insure negative air can be maintained. Full containment.
 4. Set-up Negative Air Machine to minimize airflow 4 to 8 ACH (air changes per hour).
 5. Pre-clean (HEPA vacuum) structure and remove all loose structural debris in doubled (6-Mil) sealed plastic bags.
 6. The use of electric blower inside each containment area to suspend fine particulates so that they are captured by a HEPA filter.
 7. Demolition of contaminated structure, then double bagged and removed to dumpster daily.
 8. Scrape, wire brush, orbital sanding, Media and or Dry ice blasting to remove any visible mold growth from structural materials.
 9. HEPA vacuum, biowash(wet wipe) then HEPA vacuum 2nd time (dust free environment). Clean and encapsulate any structure members affected by mold. (organic surfaces)
10.HEPA vacuum, double bag and remove all unsalvageable contents to dumpster.
11.Preclean salvageable contents (HEPA vacuum)
12.HEPA vacuum, wet wipe with biowash. Then HEPA vacuum all contents again.
13.Removal of all personal possessions as well as soft goods, i.e. clothing, bedding, curtains etc. Clothing may be cleaned using standard laundering products.
14.Maintain Negative Air Machine and Air Scrubbers throughout course of job.
15.HEPA Air filtration to run for a minimum of 72 hours after abatement is completed, and then shut down for a minimum of 24 hours before post remediation testing.
16.Break down of containment barriers.